EVALUATION OF A CRICKET BOWLING MACHINE WITH AN ARM AND HAND TO DELIVER THE BALL.

Ronnie Bickramdass1*, Prakash Persad2, Kelvin Loutan Jr.3 and

Aaron Ameerali4

1,2,4Design and Manufacturing, The University of Trinidad and Tobago, Trinidad

3Faculty of Engineering and Physical Sciences, University of Surrey, England

1Email: ronnie.bickramdass@utt.edu.tt *(Corresponding author)

2Email: Prakash.persad@utt.edu.tt

3Email: k.loutan@surrey.ac.uk

4Email: aaron.ameerali@utt.edu.tt

Abstract:

The use of bowling machines to train batsmen whether it be indoors or outdoors have increased significantly. In the absence of bowlers, batsmen can bat for hours without any bowlers getting tired. The designs of these machines are often a derivative of ball projection machines used for other sports such as tennis. Reviewed literature highlights the deficit in visual information in the form of an arm and hand when using these machines. Hence a cricket bowling machine was developed with an arm and hand. The usability, functionality, repeatability and accuracy of the cricket bowling machine with an arm and hand was tested which had been previously designed and built by Dr Kelvin Loutan Jr (2016) at The University of Trinidad and Tobago. A trajectory model was developed for an indoor environment and experimentally validated with data collected from extensive testing of the bowling machine using Pitch Vision hardware and software. A design procedure had to be formulated to determine what test had to be done and the method of collecting data. The testing, collecting data and validation of the model was done with the cricket bowling machine at its current state with minor changes to the hand. The release angle at which the ball leaves the hand was found to have a significant impact on the length of the delivery. Finally, the bowling machine was able to bowl various lengths and varying speeds consistently.  The variation in speed placed the machine in the category of medium-fast, that is, speeds between 120 km/h (75 mph) and 130 km/h (81mph).

 

Keywords: Arm and hand, testing procedure, collecting data, repeatability and validation

 

https://doi.org/10.47412/VCAQ2784

 

 

Full PDF Article